I will be doing all 4 corners on my car soon and the rotors I am looking at come in 280 or 305mm for some reason I can't find them in 302mm. Question is after searching this site and the googles is, will the 302mm brackets work with 305mm rotors or is there a specific 305mm bracket that will bolt to a 98 s70 T5 hub?
I have been unable to locate a part number if there is a 305mm bracket that will work.
For those that say just go with a BBK kit, I don't have the funds to do both that and a set of 18s to fit them, as much as I want to go that route.
Here are the dimensions I have been able to find in my searchings, it looks to me like the 0.05mm height difference and the 2mm thickness difference should not be that big of a deal.
Rotor Construction
Floating Rotor
Floating Rotor
Floating Rotor
OE Type
Vented
Vented
Vented
Diameter (mm)
305.00
302.00
280.00
Height (mm)
50.30
50.25
50.50
Nominal Thickness (mm)
28.00
26.00
26.00
Minimum Thickness(mm)
25.00
23.00
23.00
Hub Hole Diameter(mm)
68.00
68.00
68.00
Stud/Stud Hole Size
16.5
14.7
14.7
Studs
5
5
5
Bolt Circle (mm)
108.00
108.00
108.00
Any help is appreciated
Thanks
Ira
I don't know why the table format it pasted in wont transfer so the format is kinda hard to read if anyone knows how to fix that, help a brother out please 