Since I had the center console out for futzing with the shifter adjustment- I decided to tackle the covering over of the wood grain trim. Not a fan of the R trim, so I decided to try the carbon weave film readily available on fleabay
Center console
![1B902AFD-A74F-4958-9A7A-F075B809094F-692]()
![0A1CDA33-8FD9-427C-9A30-F3A30F550400-692]()
Process - use rubbing alcohol & water solution to allow positioning of the film then squeegee out the bubbles.
![A647C57D-F1BD-4857-84D9-8E498CDCF54A-692]()
Glovebox - ran the weave opposite to center console. Doin the column trim the same, since I stare at the ugly plastic past the Momo wheel.
![C032C31C-0CDE-44C9-916F-92D82BBDE1DD-692]()
Try to do the center dash tomorrow - saved the worst (to do, in place) for last
Center console


Process - use rubbing alcohol & water solution to allow positioning of the film then squeegee out the bubbles.

Glovebox - ran the weave opposite to center console. Doin the column trim the same, since I stare at the ugly plastic past the Momo wheel.

Try to do the center dash tomorrow - saved the worst (to do, in place) for last